3
DC Terminal Block Wiring Instructions
The IE-MiniMc can also be powered with the DC
terminal block. From a power source, connect to
any one positive and any one negative terminal
on the IE-MiniMc.
NOTE
When using stranded wire, the leads must be tinned. The DC terminal block is
protected against mis-wiring; if mis-wired, the chassis will not function. The
chassis is internally connected to the negative power terminal.
Cascading DC Power
When installing multiple IE-MiniMc units on a DIN rail, the end user can connect to
one DC input source, and then cascade from one DC block to the next, until
reaching the maximum current available.
+5 VDC
Comments to this Manuals