PoE Giga-MiniMc and PoE+ Giga-MiniMc Operation Manual Above illustration is representative; different models available.
7 NOTE The DIN clips are designed for use on a DIN-35 rail. Wallmount Bracket Din Rail Mounting
8 DC Power Supply Precautions The following precautions should be observed when installing chassis with DC power supplies. 1. Check nameplate ratings
9 The following table lists the pin configuration for the RJ-48 connector. Pin# Signal Name 1000M Signal Direction 10/100M PoE PoE+ (ALT-B) 1 TXD1
10 Specifications for the PoE Giga-MiniMc Multi-mode 1300nm Dual Fiber Single-mode 1310nm 1550nm Dual Fiber Single-mode 1310nm 1490nm Single-Strand F
11 Standards Compliance IEEE 802.3af Power Over Ethernet IEEE 802.3 Ethernet Standards IEEE 802.3u Auto-Negotiation RFC-2474 RFC-2475 DiffServ QoS
12 About the PoE+ Giga-MiniMc The PoE+ Giga-MiniMc is a solution for private network applications that require power over Ethernet for locations insi
13 DIP Switch Configuration SFP and 1x9 PoE+ Giga-MiniMc SFP DIP Switch Name Definition Default Setting 1 PoE Reset 2 ON forces Port 2 PoE
14 PoE+ Giga-MiniMc 1x9 DIP Switch Name Description Default Setting 1 PoE Reset 2 ON forces Port 2 PoE OFF on LOS of Fiber input OFF 2
15 LED Operation SFP and 1x9 The PoE+ Giga-MiniMc includes LEDs for three ports, as shown below: PoE+ Giga-MiniMc SFP SFP LED Functions are
16 PoE+ Giga-MiniMc 1x9 1x9 LED Functions are as follows: FLT Glows red when a fault has been detected on the unit LNK Glows green with a vali
ii FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A computing device, pursu
17 Powering Options As a standalone unit, the PoE+ Giga-MiniMc uses a universal external desktop switching power adapter. The PoE+ Giga-MiniMc also
18 DIN Rail and Wallmount Bracket The PoE+ Giga-MiniMc can be mounted with two DIN Rail clips, a hardware option available through IMC Networks. The
19 DC Power Supply Precautions The following precautions should be observed when installing chassis with DC power supplies. 1. Check nameplate ratings
20 RJ-45 Pinouts The following table lists the pin configuration for the RJ-48 connector. Pin# Signal Name 1000M Signal Direction 10/100M PoE PoE+ (
21 Specifications for the PoE+ Giga-MiniMc Multi-mode 1300nm Dual Fiber Single-mode 1310nm 1550nm Dual Fiber Single-mode 1310nm 1490nm Single-Strand
22 Standards Compliance IEEE 802.3af Power Over Ethernet IEEE 802.3at PoE+ Standards IEEE 802.3 Ethernet Standards IEEE 802.3u Auto-Negotiation RFC-24
23 Fiber Optic Cleaning Guidelines Fiber Optic transmitters and receivers are extremely susceptible to contamination by particles of dirt or dust, whi
24 Safety Certifications UL/CUL: Listed to Safety of Information Technology Equipment, including Electrical Business Equipment. CE: The produc
19772 Pauling • Foothill Ranch, CA 92610-2611 USA TEL: (949) 465-3000 • FAX: (949) 465-3020 www.imcnetworks.com © 2011 IMC Networks. All rig
iii Table of Contents FCC Radio Frequency Interference Statement ...ii Warranty...
1 About the PoE Giga-MiniMc The PoE Giga-MiniMc is a solution for private network applications that require power over Ethernet for locations inside
2 DIP Switch Configuration SFP and 1x9 PoE Giga-MiniMc SFP DIP Switch Name Description Default Setting 1 PoE Reset ON forces Port 2, PSE/P
3 PoE Reset DSW When set to ON, it will force the PSE output power on the copper port OFF when the LINK state is lost on the SFP line (copper or fibe
4 LED Operation SFP and 1x9 The PoE Giga-MiniMc includes LEDs for three ports, as shown below: PoE Giga-MiniMc SFP SFP LED Functions are
5 PoE Giga-MiniMc 1x9 1x9 LED Functions are as follows: FLT Glows red when a fault has been detected on the unit LNK Glows green with a valid
6 Powering Option As a standalone unit, the PoE Giga-MiniMc uses a universal external desktop switching power adapter. The PoE Giga-MiniMc also inclu
Comments to this Manuals