Imc-networks IE–ModeConverter User Manual

IE–ModeConverter Operation Manual

7 1. Use fiber patch cords (or connectors, if you terminate your own fiber) only from a reputable supplier; low-quality components can cause many hard

8 Safety Certifications UL/CUL: Listed to Safety of Information Technology Equipment, including Electrical Business Equipment. CE: The product

19772 Pauling • Foothill Ranch, CA 92610-2611 USA TEL: (949) 465-3000 • FAX: (949) 465-3020 www.imcnetworks.com © 2010 IMC Networks. All r

ii FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B computing device, pursu

iii Table of Contents FCC Radio Frequency Interference Statement ...ii Warranty...

1About IE–ModeConverter The IE–ModeConverter is a pure mode converter that converts any fiber optics type to any other fiber optics type. This prod

2 Installing the IE–ModeConverter The IE–ModeConverter installs anywhere as a standalone, table-top device or on a DIN rail. As a standalone device,

3 Powering the IE–ModeConverter The IE–ModeConverter requires an external DC power source and has three powering options: • Universal AC power adapt

4 Cascading DC Power If installing multiple IE–ModeConverters on a DIN rail, you can use one DC input source and then cascade from one DC terminal blo

5 DC Power Supply Precautions The following precautions must be observed when installing the chassis model with an internal DC power supply. 1. Check

6 Specifications Input Specifications AC Wall Adapter 100 to 240 ±10% VAC input, 5 VDC output, 2A max. DC terminal +7 VDC to +50 VDC @ 2.5 watts. Ac