iMediaChassis series iMediaChassis/20 iMediaChassis/6 iMediaChassis/3 Operation Manual
6 Installing SNMP Management and Application Modules To install a module: 1. Remove the blank bracket (if present) covering the slot where the module
7 Replacing Power Supply Modules User-Replaceable Power Supply Modules While power supply modules are redundant, failed power supply modules should
8 Dual DC, Part Number 850-10954-2DC Dual AC, Part Number 850-10956-2AC NOTE Do not mix AC and DC power supply modules.
9 iMediaChassis/20 Specifications Input Specifications Dual AC Input: 100 to 240V±10%, 47-63Hz, 6.3A Dual AC Dual DC Input: -38 to -72V DC 11A max
10 About the iMediaChassis/6 The iMediaChassis series is a modular chassis platform designed for use with IMC Networks’ Simple Network Management Pro
11 • Both power supply modules malfunction • Both power supply modules are powered down • When the AC line fails SNMP Write Lock There is an SNMP Wri
12 Installing the iMediaChassis 6 Install the chassis first before installing any modules into an iMediaChassis. When installing the chassis, be su
13 SNMP Management Modules include two twisted pair ports, one for management and one reserved for future use. The Management Module also features a
14 DC Power Wiring, Replacing Power Supply Modules and Fans DC Power Supply Wiring Instructions The following diagram shows the wiring configurations
15 iMediaChassis/6 Specifications Input Specifications Dual AC Input: 100/240VAC 47-63Hz 1.8A @10VAC 115V @ 1.6A and 230V @ 0.8A (single) Dual
ii FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B computing device, pursu
16 About the iMediaChassis/3 The iMediaChassis series is a modular chassis platform designed for use with IMC Networks’ Simple Network Management Pro
17 Installing the iMediaChassis/3 Install the chassis first before installing any modules into an iMediaChassis. When installing the chassis, be su
18 SNMP Write Lock The SNMP Write Lock switch is located on the back of the iMediaChassis/3. The SNMP Write Lock switch prevents a new management b
19 SNMP Management Module LEDs The SNMP Management Module features several LEDs. The LED functions are: LNK/ACT FDX/COL TEMP PS FAN A / FAN B Gl
20 Power Supply Modules Power supply modules in all models of the iMediaChassis/3 are fixed, and not end-user replaceable. Fans The iMediaChassis/3 i
21 Hardware Feature Matrix Power Supply iMediaChassis/20 iMediaChassis/6 iMediaChassis/3 Versions AC, 2AC, 2DC AC, 2AC, DC, 2DC AC, 2AC, DC, 2D
22 IMC Networks Technical Support Tel: (949) 465-3000 or (800) 624-1070 (in the U.S. and Canada); +32-16-550880 (Europe) Fax: (949) 465-3020
23 Safety Certifications UL/CUL: Listed to Safety of Information Technology Equipment, including Electrical Business Equipment. CE:
19772 Pauling • Foothill Ranch, CA 92610-2611 USA TEL: (949) 465-3000 • FAX: (949) 465-3020 www.imcnetworks.com © 2008 IMCNetworks. All r
iii Table of Contents FCC Radio Frequency Interference Statement ...ii Warranty...
iv About the iMediaChassis/3 ...16 iMediaChassis/3 Features ...
1 About the iMediaChassis/20 The iMediaChassis series is a modular chassis platform designed for use with IMC Networks’ Simple Network Management Pro
2 Reset Alarm Switch When one power supply module malfunctions, an audible alarm sounds indicating the loss of the power module. The alarm can be si
3 The SNMP Management Module can be removed and replaced as necessary. Refer to the SNMP Management Module manual for complete instructions about ho
4 Installing the iMediaChassis/20 Install the chassis first before installing any modules into an iMediaChassis. When installing the chassis, be sur
5 Wiring Instruction Guidelines for iMediaChassis/20-2DC 1. Connection of a suitable grounding conductor to the grounding terminal at each power sup
Comments to this Manuals